Licensed & Insured, in Salem and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Salem
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (971) 273-5957 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Salem and surrounding areas · On-site visits included · Free estimate within 24h
Salem Metal Roofing is a team of local certified professionals based in Salem. We respond quickly in Salem and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (971) 273-5957⭐⭐⭐⭐⭐ 4.9/5 · 274 verified Google reviews
“We needed the roof done on our hay barn before the fall rains hit, and these guys knocked out the whole thing in about three days. The crew was respectful of the equipment inside and cleaned up every last screw and scrap of metal. Couldn't ask for a smoother job on an ag building.”
Commercial & Agricultural Metal Roofing
“Had a copper awning put over our front porch and it looks absolutely stunning. The crew was meticulous with the seams and the patina finish is exactly what we hoped for. It's the first thing guests comment on now.”
Copper & Specialty Metal Roofing
“Our old red barn had shingles that were shot, and instead of tearing everything off they retrofitted the metal panels right over the top. Saved us a ton of money and the barn looks brand new. Took them about four days with a crew of five.”
Metal Roof Over Shingles (Retrofit)
“We went with standing seam for our house and I'm so glad we did. The crew of four had it done in under a week, and the cleanup was spotless, my husband found maybe two stray screws in the yard. The hidden fasteners make it look so clean from the street.”
Standing Seam Metal Roofing
“Had a leak around our chimney flashing that two other roofers couldn't figure out. Salem Metal Roofing found the problem in about ten minutes and had it sealed up the same day. No more drips in the living room, finally.”
Chimney & Skylight Repair
“Our house sits back in the trees and the old roof was constantly getting hit with debris and moss. They installed a new metal roof over about 2,400 square feet and it's been night and day. Should've done this years ago.”
Metal Roof Installation
“Straightforward replacement on our ranch house, they tore off the old stuff and had the new metal panels on within a week. Fair price, no surprises on the invoice, and the crew was easy to have around. Only wish they'd given me a heads up they'd start a day earlier than planned.”
Metal Roof Replacement
“We wanted to keep the Tudor look of our house but get the durability of metal, and metal shingles were the perfect answer. The crew matched the style beautifully and even fixed the flashing around our skylight while they were up there. It's been through two windstorms already without a single issue.”
Metal Shingle RoofingReal photos of our work in Salem · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel installation | Starting at $8/sq ft | Includes tear-off of one layer, synthetic underlayment and standard flashing; price rises with pitch and deck repair. |
| Standing seam installation | Starting at $13/sq ft | Concealed fasteners and raised seams; complex gables, chimneys and historic district details push the rate up. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Stamped or granule-coated panels; HOA-approved colors and steep pitches add material and labor cost. |
| Retrofit over existing shingles | On estimate | We verify code limits on existing layers and deck condition before quoting; savings depend on tear-off avoidance. |
| Complex or large-scale job | On estimate | Multiple roof sections, steep historic gables or agricultural buildings need an on-site walk before pricing. |
| Estimate | Free | Response within 24 hours at (971) 273-5957, written scope, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation | Starting at $10/sq ft | Includes tear-off, underlayment, roll-formed panels and standard trim for a typical Salem home. |
| Standing seam over existing shingles | Starting at $8/sq ft | Retrofit over one layer of sound shingles where code allows, with subframe and new panels. |
| Complex or steep-pitch roof | On estimate | Steep gables, multiple valleys and historic trim need an on-site look before pricing. |
| Deck repair or replacement | From $2/sq ft | Replacing soft or damaged sheathing found during tear-off, priced by the square foot. |
| Travel | Included | In Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 273-5957, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, new underlayment and corrugated or ribbed panels. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and formed seams, priced higher on steep and cut-up roof layouts. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Textured panels with impact resistance, cost rises with valleys and dormer detailing. |
| Copper and specialty metal | On estimate | Premium material and soldered detailing need an on-site look before pricing. |
| Travel | Included | In Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 273-5957, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener retrofit | Starting at $7/sq ft | Includes underlayment, edge metal, and basic flashing, with layer count and deck condition as the main cost drivers. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed fasteners and clean seams, with roof complexity and panel width moving the final number. |
| Metal shingle or stone-coated retrofit | Starting at $12/sq ft | Stamped or granule-coated profiles, priced higher on steep gables and historic-district homes. |
| Partial deck repair | On estimate | Soft sheathing or rafter damage found during inspection needs an on-site look before we quote. |
| Travel | Included | In Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 273-5957, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (fasteners, sealant, small flashing) | Starting at $450 | Covers a handful of fasteners, a resealed penetration, or a small flashing fix. Scope and access move the price. |
| Panel replacement (single or short run) | Starting at $850 | Includes removing the damaged panel, matching the profile, and re-securing seams. Steep or high access adds cost. |
| Storm damage repair | On estimate | Limb strikes and wind-lifted panels need an on-site look to scope the full repair before a number is given. |
| Travel | Included | In Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (971) 273-5957, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-point leak repair | Starting at $450 | Diagnostic roof walk, leak tracing, and one fastener or small flashing fix included |
| Fastener replacement and re-fastening | Starting at $650 | Failed screws and washers replaced across the affected slope, priced by panel count |
| Chimney or skylight flashing rebuild | Starting at $850 | Old flashing cut out and rebuilt with new metal, priced by penetration complexity |
| Emergency tarping after storm | Starting at $350 | Same-day roof securing to stop water entry, permanent repair quoted separately |
| Complex or multi-point leak | On estimate | Multiple leak points or panel replacement need an on-site look before pricing |
| Estimate | Free | Response within 24 hours at (971) 273-5957, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (single slope) | Starting at $750 | Includes new screws, UV-resistant washers and a hose test on one typical slope. |
| Full-slope re-screw | Starting at $1,450 | Covers pulling and replacing every fastener on one slope, with oversized screws and new washers. |
| Whole-roof re-fastening | Starting at $2,800 | Includes all slopes, ridge and eave trim, plus gutter clearing and a full water test. |
| Decking repair under failed fasteners | On estimate | Soft or rotted decking needs an on-site look before we can price the repair. |
| Travel | Included | In Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 273-5957, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple outbuilding | Starting at $5.50/sq ft | Includes panels, underlayment and trim; price rises with pitch, span and deck repairs. |
| R-panel roof on a ranch or shop | Starting at $6.50/sq ft | Heavier gauge and cleaner lines; access, valleys and skylights move the number. |
| Full house re-roof with tear-off | Starting at $8.50/sq ft | Tear-off, new underlayment, flashing and trim included; steep pitches add labor. |
| Retrofit over existing shingles | On estimate | Needs an on-site look at existing layers, deck condition and code limits before pricing. |
| Travel | Included | In Salem and surrounding Marion and Polk County areas, no separate mileage fee. |
| Estimate | Free | Response within 24 hours at (971) 273-5957, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stamped steel shingle installation | Starting at $9/sq ft | Includes underlayment, standard flashing, and labor; steep pitch or many penetrations raises the rate. |
| Stone-coated steel shingle installation | Starting at $12/sq ft | Includes premium granule finish and matching trim; product line and roof complexity move the final number. |
| Metal-over-shingle retrofit | Starting at $10/sq ft | Includes evaluation of existing layers and code limits; deck repairs or added strapping push the price up. |
| Full tear-off and re-roof | On estimate | Multiple old layers, soft decking, or historic detailing need an on-site look before we quote. |
| Travel | Included | In Salem and surrounding Marion and Polk County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (971) 273-5957, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard gable | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, panels, standard flashing and disposal for a simple gable roof. |
| Stone-coated steel, complex roof | Starting at $12/sq ft | Includes multiple valleys, chimneys, skylights and steep pitch work, which add labor and flashing time. |
| Tear-off of second layer | Starting at $1.50/sq ft | Covers stripping a second layer of shingles and disposing of it, common on 1950s and 1960s Salem homes. |
| Deck repair and replacement | On estimate | Needs an on-site look because rot near chimneys and valleys is only visible after the old roof comes off. |
| Travel | Included | In Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (971) 273-5957, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent (porch, bay window, dormer) | Starting at $20/sq ft | Includes custom-fabricated copper, underlayment, and hand-formed flashing; complexity and access move the price. |
| Full copper roof | Starting at $35/sq ft | Includes tear-off, deck repair, underlayment, standing seam or flat-seam copper, and custom details. |
| Zinc or aluminum specialty roof | Starting at $22/sq ft | Includes pre-weathered or bare panels, underlayment, and standard flashing; profile and panel length affect cost. |
| Custom fabrication and historic details | On estimate | Hand-formed gutters, finials, and caps are priced by the piece after an on-site measure and design review. |
| Travel | Included | In Salem and surrounding Marion and Polk County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (971) 273-5957, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential coating | Starting at $2.50/sq ft | Wash, rust treatment, prime and topcoat on a sound roof in normal condition |
| Heavy prep or rust restoration | Starting at $3.50/sq ft | Adds moss removal, rust converter and spot priming at fasteners and laps |
| Steep or complex roof | On estimate | Steep gables, multiple valleys and tight access raise setup and safety time |
| Commercial or agricultural panels | On estimate | Low-slope and large-span roofs need a heavier system and an on-site look |
| Travel | Included | In Salem and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (971) 273-5957, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Chimney flashing rebuild | Starting at $600 | Includes new counter-flashing cut into the mortar joint plus a new base pan. |
| Skylight re-flash | Starting at $600 | Covers new flashing around the curb; a rotted curb rebuild adds labor and material. |
| Valley or step flashing repair | Starting at $650 | In-house bent metal for the valley or sidewall transition, with sealant and fasteners. |
| Full skylight curb rebuild | On estimate | Rotten wood curb and pan replacement needs an on-site look before pricing. |
| Estimate | Free | On-site inspection and written price, response within 24 hours at (971) 273-5957. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Short guard run over one entry | Starting at $1,200 | Includes guards, sealed fasteners, and labor over a single door or walkway. |
| Multi-zone guard layout | Starting at $1,850 | Covers several drop zones, with price driven by run length and roof height. |
| Snow rail system on steep panel | Starting at $2,600 | Rail and bracket system for long steep runs above decks and driveways. |
| Farm or commercial building | On estimate | Long walkways and ribbed panels need an on-site look before pricing. |
| Travel | Included | in Salem and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (971) 273-5957, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing and gutter inspection with photo documentation, no obligation to book the repair |
| Minor repair (re-fastening, resealing) | Starting at $250 | Includes screw replacement, seam resealing and a water test, priced by panel count and roof access |
| Panel or section replacement | Starting at $650 | Includes matching panel, labor and flashing touch-up, moves up with panel profile rarity and height |
| Limb strike with structural damage | On estimate | Deck and purlin damage needs an on-site look before we can scope the repair honestly |
| Emergency tarping and weatherproofing | Starting at $300 | Temporary protection to stop water intrusion, credited toward the permanent repair if booked within 30 days |
| Travel | Included | In Salem and surrounding Marion and Polk County areas, no separate call-out or mileage fee |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic roof inspection | Free estimate | Ground and roof-level look with a clear verbal recommendation, no written report. |
| Written inspection report | Starting at $250 | Photo-documented report with severity ratings and remaining service life; roof size and pitch move the price. |
| Pre-purchase or insurance inspection | Starting at $350 | Detailed report formatted for buyers, sellers or claim documentation; number of penetrations and flashing details affect cost. |
| Large or complex roof | On estimate | Steep gables, multiple chimneys, skylights or farm buildings need an on-site look before we quote. |
| Travel | Included | in Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 273-5957, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard profile | Starting at $9/linear ft | Includes 5-inch seamless run, hidden hangers, basic downspout and flush test at completion. |
| 6-inch high-capacity gutter with leaf guards | Starting at $14/linear ft | Adds larger capacity and fine-mesh guards for fir needles and maple leaves; tree cover moves the price. |
| Standing seam clamp hanger system | Starting at $16/linear ft | Non-piercing seam clamps protect the panel warranty; panel profile and roof pitch drive cost. |
| Complex or large-scale job | On estimate | Steep multi-story access, box gutters and long commercial runs need an on-site look first. |
| Travel | Included | In Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (971) 273-5957, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair and re-fastening | Free estimate | Covers screw and gasket replacement, leak tracing and flashing repair on existing panels, priced by roof size and access |
| Exposed-fastener panel roof | Starting at $4.50 per sq ft | Screw-down ribbed panels for barns and sheds, with price driven by span, pitch and deck condition |
| Standing seam commercial roof | Starting at $9 per sq ft | Concealed-fastener panels with underlayment, priced by square footage, slope and flashing complexity |
| Insulated agricultural system | On estimate | Condensation control and thermal performance require an on-site look at purlins, ventilation and building use |
| Travel | Included | In Salem and surrounding Marion and Polk County areas, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (971) 273-5957, with a written scope and no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Salem usually want the same thing: a straight answer about whether their roof can be repaired or really needs to be replaced. Salem Metal Roofing is the local team to call for metal roof installation, replacement, re-roofs, and repairs on homes across the Willamette Valley. We work on the steep gables of Court-Chemeketa and Gaiety Hill Victorians, the low-slope ranches of South Salem, the newer two-story subdivisions in West Salem and Keizer, and the farm buildings out toward Turner, Aumsville, and Stayton.
Our network of licensed, insured local contractors understands what this climate does to a roof: long wet winters, moss and algae on shaded slopes, fir needles and maple leaves packing the gutters, and winter windstorms that drop limbs. We also see a large stock of 15 to 30 year old screw-down roofs whose fasteners are backing out. If you want an honest assessment before you spend, start with a metal roof inspection.
Most metal roof leaks in Salem trace back to a handful of predictable failures. On exposed-fastener roofs, the number one cause is fasteners backing out as the EPDM sealing washers dry, shrink, and crack, letting water past the screw head. Seams can separate as panels expand and contract with temperature swings. Pipe boots and flashing fail at chimneys, skylights, and valleys, where water concentrates. Windstorms lift and peel panels, and fallen Douglas fir limbs puncture even heavy-gauge steel. Each of these is fixable, but only if it is caught before the damage spreads.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the point of entry, so a stain on your ceiling may sit many feet from the actual gap. By the time it shows, sheathing can be rotted and insulation soaked. That is why we start every metal roof leak repair by finding the true source, not just sealing the visible spot.
The honest call between repair and replacement comes down to the condition of the panels, the deck, and the fasteners. On many aging screw-down roofs, a full screw replacement and re-fastening with new washered fasteners restores a watertight roof for a fraction of replacement cost. When panels are sound but seams or flashing have failed, targeted metal roof repair is often the right answer. Call (971) 273-5957 and we will tell you plainly which one your roof needs.
We install the full range of metal systems and match the roof to the house, the pitch, and the budget. Standing Seam Metal Roofing uses concealed clips and raised seams, with no exposed screws to service, which makes it the premium choice for primary homes. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. For a different look, we install Metal Shingle Roofing and Stone-Coated Steel Roofing, and we handle Copper & Specialty Metal Roofing for accents and historic profiles.
The trade-off is simple: standing seam costs more up front and has no exposed fasteners to maintain, while screw-down costs less and needs its fasteners serviced over its life. When the deck is sound, a Metal Roof Over Shingles (Retrofit) can be a legitimate way to save on tear-off. When the deck is not sound, a full Metal Roof Replacement is the correct call.
Metal roof installation is typically quoted per square foot, while repairs are often flat-rate. Your price depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, the condition of the decking, and site access. Think in terms of typical ranges rather than a single number, because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
We would rather give you a clear number than a sales pitch. Review our pricing page for how we quote, then request a free estimate or a free roof inspection so we can look at your actual roof and site conditions.
After a windstorm or ice event, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we find; the decision is yours and your insurer's.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and fees and inspection requirements differ by jurisdiction. Recovering over existing shingles is limited by code to a set number of existing layers, and historic district or HOA design review can restrict panel profile and color. Requirements vary, always verify with the Salem building or planning department before starting your project. If you have questions about your roof, contact us.
Ready to get started? Salem Metal Roofing serves in Salem and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Salem · Response within 24h · No commitment · ☎ (971) 273-5957
Your Free Quote Request